齿根

na.root (of a tooth); dedendum

网络释义：root of tooth; tooth root; fang

网络释义

na.1.root (of a tooth)2.dedendum

na.1.牙根2.齿轮根部

1.dedendum addendum 齿冠 dedendum 齿根 air compressor 空气压缩机 ...

2.root of tooth rootof thread 螺纹牙底 root of tooth 齿根 roots of unity 单位根 ...

3.tooth root tooth decay 蛀牙；龋齿；齵齿 tooth root [医]齿根；[医]牙根 tooth paste 牙膏 ...

4.fang 齿龈: gum 齿根: root;fang (牙)珐琅质: enamel ...

5.dental root ·广告文案:香烟- Cigarette dental root 齿根 denucleation 去核 ...

6.Root,tooth Rodents 啮齿类 Root,tooth 齿根 Root nodule 根瘤 ...

7.base of tooth Base of Tally 理货依据 base of tooth 齿根 base of transistor 晶体管座 ...

1.The pinions may be configured for engagement with the pair of side gears and each of the pinions may have a tooth with a second tooth flank.所述小齿轮可配置成与所述一对半轴齿轮啮合，并且每个小齿轮可具有带第二齿根面的齿。

2.The stub gear tooth is often adopted in the involute planetary gear transmission with a few tooth number difference.在渐开线少齿差行星传动中通常使用短齿，其齿根高与正常齿相同，而齿顶高小于正常齿。

3.Therefore, the calculated tooth root stress of the unified expression principally differs from the one of the original standard.因此，计算出齿根应力的统一表达主要的不同之处之一，原来的标准。

4.In view of this it not surprisingly that the basis of almost all tooth root stress calculations is very close to this type of modelpng.鉴于这一点，这并不奇怪的基础上几乎所有的齿根应力的计算是非常接近这种类型的模型。

5.By studying the distribution of the stress, the fracture in root part of the tooth is testified and the cause is found.通过研究应力分布，证实齿根开裂现象的发生，找到齿根开裂的原因。

6.The results show that the maximum stress usually appears near the position when the tooth bears most of the load.分析结果表明，齿根应力最大值一般出现在轮齿承受最大载荷的时刻附近。

7.pitch diameter, pitch point, addendum circle, dedendum circle, addendum, dedendum, circular pitch, diameter pitch.中径，螺距点，增编圆，齿根圆，增编，齿根，间距圆形，直径间距。

8.The results show that the stress distributions in roots of the bevel gear are different under respective loads.光弹性试验结果表明锥齿轮在两种载荷分别作用下，齿根应力分布是不同的。

9.Each of the side gears may have a tooth with a first tooth flank.每个半轴齿轮可具有带第一齿根面的齿。

10.The crack propagation of involute spur gears was simulated, and the result is consistent with the experimentation results.模拟了渐开线直齿轮齿根裂纹扩展过程，模拟结果与试验结果相吻合。