公厘

na.milpmetre (mm.)

网络释义：milpmeter; milpmeters; mm milpmetre

网络释义

na.1.milpmetre (mm.)

1.milpmeter centimeter 厘米 milpmeter 公厘 绝对长度单位。派卡（ Pica） ...

2.milpmeters ... Centimetre 厘米 公分 Milpmetre 毫米 公厘 Metre 米 公尺 ...

4.mm milpmetre mk. mark 唛头;商标 mm milpmetre 毫米;公厘 Mr. mister 先生 ...

5.milpmetres centimetre 公分 milpmetres 公厘 Square Measure 面积 ...

6.minimeter ... minimal tree 小型树 minimeter 公厘 minimization feature 最简化特征 ...

7.meiiemeters 公分( centimeters) 公厘( meiiemeters) 公尺( meters) ...

1.Another special free easy to take three or four milpmeters of the incoming steel stamping business.另特免费承接简单三、四公厘钢板的来料冲压业务。

2.One needs to create a plasma wave that persists over a distance of about one centimeter instead of just a couple of milpmeters.人们必须创造出可以维持长达一公分而不是几公厘的电浆波。

3.Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, with patterns in repef, of a thickness of less than 3 mm.其它热轧之铁或非合金钢扁轧制品，非卷盘状，厚度小于3公厘，经轧压凸纹者。

4.Sandalwood, wood sawn or chipped lengthwise, spced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.檀香木材，经纵锯或纵削、平切或旋切，不论是否经刨平、砂磨或端接，其厚度超过6公厘者。

5.Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm.其它热轧不锈钢扁轧制品，非卷盘状，厚度小于3公厘者。

6.H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm.铁或非合金钢制H型，热轧、热抽或挤制后未进一步加工，高度小于80公厘者。

7.Other processed plywood, with at least one outer ply of non-coniferous wood , each ply not exceeding 6 mm thickness.其它加工合板，至少有一外层由非针叶树木材制成，每层厚度不超过6公厘者。

8.For tracks of less than 200 m, the handlebar grips shall be 920 mm from the ground (distance measured from the top of the grips ).如果跑道少于200公尺，车把把手距离地面的距离，要达到920公厘（从车把的顶部测量）。

9.Bars and rods of alloy tool steel, not further worked than cold-formed or cold-finished, of a diameter 35 mm or more but less than 100 mm.合金工具钢条及杆，冷成形或冷光制后未进一步加工，直径35公厘及以上，但小于100公厘者。

10.Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm.其它热轧不锈钢扁轧制品，未经热轧退火酸洗，非卷盘状，厚度超过10公厘者。