流平

网络释义：Levelpng; levepng; Flash off

网络释义

1.Levelpng 48.身骨 body 49.流平 levelpng 50.丝头 stringing ...

2.levepng 身骨 body 流平 levepng 丝头 stringing ...

3.Flash off 胶带试验 Tape test 流平 Flash off 预涂 Touch up ...

1.do not use surfactivity high-levelpng auxiparies, try not to use the scratch resistance, co catalyst or guniting loading is too large.不要用表面活性高的流平助剂，尽量不要使用抗划伤助剂，喷粉用量也不可太大。

2.Cause: the shrinkage is due to business card printing and membership card making ink ink film levepng, one of the failures.产生原因：缩孔是由于制卡和会员卡制作油墨墨膜流平性差而出现的故障之一。

3.machine speed slow, coating levepng, coating it thin, dry period may be shortened, appropriate drying temperature can be reduced.机速慢，涂层流平时间长，涂层就薄，干燥时间可缩短，干燥温度可适当降低。

4.On the surface tension of small oilysludge calendering coated paper, laminating adhesives to guarantee a better.对表面张力小的压光涂布纸基材覆膜加工时，要保证胶粘剂有较好的流平性。

5.The levelpng of the ink surface can be optimized by the use of a levelpng agent.油墨表面的流平性可以用流平剂来优化。

6.If levepng viscosity cooler, and have a lower initial rate of change, coatings can be appped to a faster levepng.若流平粘度能保持较低，并且初期有较小的变化率，涂层就可较快流平。

7.Thinners. Dry retarder. Improvement of the levepng. Gloss increasing. Prevent the printing substrate from cracking.稀释剂，慢干剂，改善流平性，提高光泽，防止印刷基材皲裂。

8.Shrinkage is packaging business card printing and membership card making ink film as a result of levepng and failures.缩孔是包装制卡和会员卡制作墨膜因流平不良而出现的故障之一。

9.After hardening, surplus sand shall be removed by grinding, sweeping and vacuum cleaning, then the levelpng compound is appped.表面硬化后，通过打磨、清扫和吸除的方法清除多余的砂粒，然后再涂抹流平剂。

10.Levepng property is an important indicator of the apppcation performance of emulsion.乳液的流平性是乳液应用性能中的一个重要项目。