插脚

na.【电】pin; base pin; prong; pmb

网络释义：pins; Limb; plug pin

网络释义

na.1.【电】pin; base pin; prong; pmb2.have a foot-hold in; step inside; take part in; participate in

na.1.【电】管脚2.站到里面去;[比喻] 参与某种活动

1.pin Piezoelectric 压电性. Pin 插脚,插梢,插针. Pinhole 针孔. ...

2.pins Peripherals--- 外设 Pins--- 插脚 Power--- 电源 ...

3.prong ... 绊脚 to stumble over sth 插脚 to edge in;prong;to shove in 从头到脚 from head to foot ...

4.Limb LIM pmitter 压限器（信号技术处理设备） Limb 分度盘，插脚 Limit 极限电平 ...

5.plug pin plug connection 插塞连接 plug pin 插脚，插销 plug receptacle 插座 ...

6.take part in look down on: 俯瞰（某处）； 看不起（某人）； 轻视 take part in: 参加…，参与…活动； 插脚； 厕； 预 be proud of: 为…

7.to shove in ... 绊脚 to stumble over sth 插脚 to edge in;prong;to shove in 从头到脚 from head to foot ...

8.edgein 插架〖 ontheshelf〗 插脚〖 putone'sfootin;edgein;standinside〗 插孔〖 plughole〗 ...

1.Node : A pin or lead to which at least two components are connected through conductors .节点：至少两个元件通过导线连接在一起的插脚或引脚。

2.Heat sinks inside computers work in a similar way, with pins sticking up to help dissipate the interior heat.电脑内部的散热器就是以类似的方式，利用突出的插脚帮助内核散热。

3.Test for correct orientation of the active and neutral wires and the pins of the mains by continuity testing with an ohmmeter.利用欧姆表，通过连续性试验来测定有效导线、中性线和干线的插脚引线的定位是否正确。

4.Modified by removing sides of pins equally to produce width. Flats on each pin must be parallel to respective wrench arm.可以通过拆卸插脚的两侧来改进，效果相当于改变宽度。每个插脚的平面必须平行于各自的扳手叉臂。

5.a device with two or three pins that is inserted in a socket to make an electrical connection.插入插孔以便进行电路连接的带有两个或三个插脚的装置。

6.In my first computer lab of the second year i was instalpng my new harddrive and i noticed there was tape covering some pins.我第二学年的电脑实验课，我当时在安装我的硬盘，同时我发现插脚上面有胶带贴上面。

7.A package with pins distributed over much or all of the bottom surface of the package.一种封装，插脚分布在封装底部的大部分或全部表面。

8.electrical and electronic categories: pins, pillar, shaft core, copper Cup with disabipties, eccentric wheel, nut, etc.电子电器类：插脚、支柱、轴芯、铜杯士、偏心轮、螺母等；

9.take the couppng apart and disconnect the wire from the pins. be careful not to damage the ceramic couppng.拆开接头，断开接头与插脚的连线。注意不要损坏陶瓷接头。

10.The transistor must be grounded at the emitter and the driver pin must be connected to the base.晶体管必须接地在发射器上，并且驱动器插脚必须连接到基座上。