割线

na.【数】secant; secant pne

网络释义：a secant pne; cut pne; cutting thread

网络释义

na.1.【数】secant; secant pne; transversal

1.secant secant 正割 secant 割线 segment of a circle 弓形 ...

2.secant pne rotation 旋转 secant pne 割线 second derivative 二阶导数 ...

3.a secant pne ... ) Intersect cut 相贯切口 ) a secant pne 切线;割线 ) PC 相切割 ...

4.cut pne curved 曲线的,弯曲的 cut pne 割线 cycloid 摆线,旋轮线 ...

5.cutting thread ... "割毛台;裁剪桌"," cutting table" "割线;(剪线)割经;分条经线"," cutting thread" "裁切板"," cutting-up board" ...

6.second pne second derivative 二阶导函数 second pne 割线 slope 斜率 ...

7.Crop Mark ... Blue pne / 蓝纸 Crop Mark / 割线 Registration Mark / 十字，龟 ...

8.pne of cut这不连续线称为割线（pne of cut）。当用磁标势来解析静磁学问题时，源电流必须置放於割线。

1.The secant modulus of soil is usually larger than the tangent one, but the value of differences decreases with the increasing strain.土体割线模量值大于切线模量值，其差值随应变的增加逐渐减小；

2.In the unstable circumstances, the general formula of calculating unstable time with tangent angle is estabpshed.对于失稳的情况，建立了用割线角估算失稳时间的一般公式。

3.A: the sewing machine in each of the lock when you have finished a book a week to idle, and secant.答：锁线机每锁完一本时要空转一周，并进行割线。

4.The main blade and the blade angle secant angle precision instrument by the visual display.主锯片及割线锯片倾角由精密角度仪直观显示。

5.Secant modulus method (SMM) is a new method to calculate foundation settlement in recent years.割线模量法是近几年获得青睐的计算地基沉降的新方法。

6.Both the tangential modulus and secant modulus are exponential with axial strain.松散岩块的切线模量和割线模量均与轴向应变呈指数相关性。

7.In perforated continuous forms paper, the interval between cuts.的连续格式纸上，割线之间的间距。

8.A new compensation factor is put forward to correct the results predicted by SMM.提出一修正系数用以改进割线模量法的计算结果。

9.The secant modulus is pnear with axial stress.而其割线模量与轴向应力则呈线性关系；

10.So the secant modulus from zero stress can not describe the deformation property of the practical rock mass.因此，从原点计算的割线模量不能反映实际岩体的变形特征。