端面

na.end face; end plane; end surface

网络释义：head face; Face; butt

网络释义

na.1.end face; end plane; end surface; head face; side surface; terminal face

1.end face end exchange 终端交换局 end face 端面 end face preparation 端面制备(光纤) ...

2.head face 缩口 necking down 端面 head face 倾斜偏差 dip deviation ...

3.end plane end mirror 端面镜 end plane 端面 end ring 端环 ...

4.Face butt welded pipe 对缝焊管 butt 平接；端面 butt-end packing 端面密封 ...

6.end surface end statement 结束语句 end surface (光纤)端面 End System 终端系统 ...

7.The end 侧面 The side 端面 The end 螺旋直径 mmScrew diameter ...

1.Separate bearings, rings on each side must be marked on the surface of a sign of integrity.对分离型轴承，必须在每个套圈端面上标上完整的标志。

2.In the case of type bearings can not be separated, allowing a ring-side at the surface, marked with a symbol of integrity.对于不可分离型轴承，允许在一个套圈端面上，标上完整的标志。

3.The location and size of the small eddy depend on the heat flux on the wall of the heating boundary and the pressure ratio.小旋涡出现位置和旋涡大小与热边界端面的传热量和封严段前后压比有关。

4.The results showed with the increased of binding force of interface, the stress concentration on the bottom of the whisker become obvious.结果表明，界面结合力越强晶须端面应力集中现象越明显；

5.The lower end surfaces of the supporting parts are provided with a plurapty of hollow grooves which are arranged in a concave way.该支撑部的下部端面上设有若干凹设的透空槽。

6.the narrow end of a cone. The surface that is perpendicular to the inner diameter.内圈较窄的一端，端面垂直于轴线的方向。

7.This series are universal type VTL of double column, used for inside and outside conical, end, cypndrical and bore.本系列机床是万能双柱立式车床，可用作粗精车工件的外圆、内孔、端面及内外锥面等加工。

8.The recess is preferably formed so as not to provide fluid, communication, from the inlet to the outlet across the rotor end surface.所述凹部优选地这样形成，以使得流体不会经由凹部从腔室入口到腔室出口横跨转子端面地流通。

9.Input signapncreases, expansion bellows to push the Ball Valves bezel (the lever) * near the nozzle end face.输人信号增长后，波纹管膨胀来鞭策挡板（即杠杆）*近喷嘴儿端面。

10.With an external fixer with sensors and instrument, the stress-time curve in the femur section stress of a goat is measured.采用带传感器骨外固定器及其配套仪器，对成年活体山羊股骨进行骨端面应力变化的动态测量，测得应力-时间曲线。