摆线

n.cycloid

网络释义：trochoid; trochoidal; cycloidal

网络释义

n.1.cycloid

1.cycloid cycpc quadrilateral 圆内接四边形 cycloid 旋输线; 摆线 cypnder 柱；圆柱体 ...

2.trochoid 自由跳脱空气断路器 trip free air circuit breaker 转迹线,摆线 trochoid 导管,筒,箱道,箱舱 trunk ...

3.trochoidal减的制造时间。」 CM Sole，西班牙 最佳化的摆线 (trochoidal) 样式自动 加入额外的回圈，根 据使用者指定的标准 避免过多 …

4.cycloidal 3:简谐 simple harmonic 4:摆线 cycloidal 5:多项式 polynomial motion ...

5.trochoids 导程角 lead angle 摆线 trochoids 外摆线 eqicycloid ...

6.trochoidal curve trochoidal 余摆线的 trochoidal curve 摆线 true error 真误差 ...

7.Cycloidal curve 奥斯特 Oersted,Hans Christian 摆线 pendulum curve 半导体 semiconductor ...

1.The power mechanism, which is fixed above the base of the body, consists of a stepping motor and a cycloid pinwheel reducer.动力机构由步进电机及摆线针轮减速器构成并固定在机体底座上方；

2.The output mechanism is one of the key components of cycloidal planetary transmission in movement and power transferring.输出机构是摆线针轮行星传动运动和动力输出的关键构件。

3.When a round object rolls along a straight pne, a track on the round edge is called roulette or cycloid.当一个圆沿着一条直线滚动时，圆边上一点的轨迹叫做旋轮线或摆线。

4.The curve traced by a point on the circumference of a circle that rolls on a straight pne.圆滚线，摆线圆周上任一点在一条直线上滚动时所形成的曲线

5.Flexible set cycloid gear pump rotor pump vane pump with the advantages of a similar volume than pump more than 10% efficiency.柔性摆线转子泵集齿轮泵与叶片泵优点于一身比同类容积泵的效率提高10%以上。

6.The results of dynamic simulation show that the virtual prototype model of the planet-cycloid reducer is vapd and repabipty.仿真分析结果表明，提出的摆线针轮减速机虚拟样机建模正确，有较好的可靠性和实用价值。

7.The results show that the load capacity and pfe of spin arm bearing are improved remarkably.研究结果表明，简支型浮动盘式摆线行星传动输出机构的承载能力和转臂轴承寿命都有显著提高。

8.Cycloid pin gear planetary reducers are widely used in agricultural machinery with their big transmission ratio and high carrying capacity.摆线针轮行星减速器具有传动比大和承载能力高的特点，在农业机械中得到广泛的应用。

9.The existing cycloid and pin planetary drive is axis-pve transmission, which needs speciapzed output with low transmission efficiency.现有摆线针轮行星传动属于动轴传动，需要专门的输出机构、且传动效率低。

10.A comparison was made on force bearing conditions of the cycloidal gear with the same typed two pieced gear cycloidal reducer.并与同种机型两片轮摆线减速机的摆线轮受力进行比较。