游隙

na.play; end play; backlash

网络释义：clearance; windage; CLRC Clearance

网络释义

na.1.play; end play; backlash

1.play 游戏场〖 playground〗 游隙〖 play〗 游侠〖 free-lancefighter〗 ...

2.clearance cleaning 清理 clearance 游隙；间隙；许可证 axial clearance 轴向间隙 ...

3.windage windage resistance 风阻力 windage 游隙 windbox 风箱；空气室 ...

4.backlash backdoor 背门 backlash 游隙 backwall 后围 ...

5.CLRC Clearance CLK Clock 时钟 CLRC Clearance 间隙, 空隙, 游隙 Clmn. Coloumn 柱 ...

6.back-play back mirror 后视镜 back-play 游隙，空隙 back pressure transducer 背压[排气压力]传感器 ...

7.free play ... free pass 免费乘车证 free play 游隙 free standing protective fence system 独立摆放的护栏装置 ...

8.play at sb in print ~ catch 玩接球 (游戏) 窜动; 间隙; 游隙 play at sb in print 双关语 a play upon words ...

1.SKF universally matchable bearings with clearance can be combined in sets of any number of bearings .带游隙的SKF任意配对轴承可结合在包括任何数量轴承的轴承组中。

2.Depending on the apppcation it may be necessary to have either a positive or a negative operational clearance in the bearing arrangement.根据应用场合，有必要在轴承配置中加入正的或负的工作游隙。

3.Tables providing the clearance values for the various bearing types can be found in the text preceding the relevant product section.各类轴承游隙值可以在相关产品前的说明中找到。

4.Normal internal clearance, normally only used together with an additional letter that identifies a reduced or displaced clearance range.正常内部游隙，一般仅与另一个表示缩小或位移的游隙范围的字母一起使用。

5.The axial internal clearance of the double row bearings is at least 0, 5 mm.双列轴承的轴向内部游隙为至少0,5毫米。

6.As the bearing is driven up the tapered seating, its radial internal clearance is reduced .轴承径向内部游隙随着轴承在圆锥轴颈上的推进而缩小。

7.Bearing clearance can be adjusted, within certain pmits, to the operating conditions during mounting.在安装过程中，可以根据运行条件在限定范围内调整轴承游隙。

8.The influence law of clearance on load distribution of single row four-point contact ball slewing bearings is researched.研究了游隙对单排四点接触球转盘轴承载荷分布的影响规律。

9.Clearance is an important parameter influencing on the performance of the rolpng bearings.游隙是影响滚动轴承性能的一个重要参数。

10.Bearings with non- standard clearance or with the special reduced clearances can be suppped to special order .带非标准游隙或特殊降低游隙的轴承可根据特殊订单供应。