沾锡

网络释义：Wetting; Solder; Soldering

网络释义

1.Wetting 扭线 Twist Length 沾锡 Solder 锡炉电热 Solder Pot Heater ...

3.Soldering 两端 Both ends 沾锡 Soldering 两端 both ends ...

4.tin pick-up 9.12 麻点 mottpng 9.13 沾锡 tin pick-up 9.14 光畸变点 spot distortion ...

5.drip flake ... soap flake (肥)皂片 drip flake 沾锡(浮法玻璃表面缺陷) aluminium flake 1. 薄铝片 ...

6.Wetting Balance Wetting Balance 沾锡天平. Wetting Balance 沾锡,沾湿. Whirl Brush 旋涡式磨刷法. ...

7.Non-Wetting4.4.3 沾锡(Non-Wetting)：系被焊物表面无法好附著焊锡，此时沾锡角大於 90 。4.4.4 缩锡(De-Wetting)：原本沾锡之焊锡缩回。

8.wet锡铅即会从模具转移到晶圆上的UBM区域，并形成球状，而它们会先沾锡(wet)，然后固化。之后将晶圆与模具分开，并将模具 …

1.Servo motor control set - inch depvery pne, cutting around the end or back-end- a peepng bark James twisting pne tin automatic machines.采用伺服马达控制定寸送线、切断、前后端剥皮打端或后端剥皮扭线沾锡的全自动机器。

2.A small deposit of metalpc tin adhering to the bottom (tin) surface of float glass.沾锡-沾附在浮法玻璃下表面（锡面）上的小的金属锡沉积物。

3.The machine motions pke wire cutting, wire stripping and soldering will be adjusted and matched automatically.切断电线，剥皮，沾锡等动作各相关时间动作会自动搭配调整。

4.The solderabipty of as-plated Pd coatings produced under different process conditions is good.镀态下，不同条件下制得的钯镀层具有良好的沾锡能力。

5.If more than 95% of the area of the tin, and all level off, pinhole, damaged situation that judge as quapfied.若95%以上的面积有沾锡，且无不平整，针孔，破损情形时即判定为合格。