熔融

na.melt; fusion; melt-out; diatexis

网络释义：melting; fusing; fuse

网络释义

na.1.melt; melt-out; diatexis; six-zone-pass; fusion

1.fusion Furnace floor 炉底，窑床 Fusion 熔融，熔化 G Gallon 加仑 ...

2.melting 熔滴 molten drip 熔融 melting 表面电阻 surface resistance ...

3.fusing定型(casting)、压模(pressing)、熔融(fusing)及吹成(blowing). 今天仍有人使用这种方法,但遇到较复杂的形状往往非常麻烦. 现 …

4.fuse fuel-lean flame fuel-rich regions 富燃料区，浓燃料区 fuse 熔化，熔融 gas duct 烟道 ...

5.melt-out 熔融〖 fusil〗 熔融〖 melt-out〗 熔丝〖 fusewire〗 ...

6.pquation pquate 熔融；熔解 pquation 熔融；熔解 pquefactive 液化的 ...

7.molten 晶格( crystal lattice) 熔融( molten) 解离( dissociation) ...

1.Sometimes magma reaches the surface through volcanoes. Then the molten rock is called lava.当岩浆通过火山口溢出地表时，便可称这种熔融的岩石为熔岩。

2.as I said previously the molten rock material is called magma if it is beneath the surface and called lava if it is on the surface.比如我前面所说的那样，熔融岩石物质位于地表之下时称之为岩浆，位于地表时称其为熔岩。

3.In some cases it may be necessary to connect metal surfaces by means of a hard spelter solder which fuses at hight temperature.某些情况下有必要用一种高熔融温度的强锌焊料来连接金属表面。

4.Costringency processing is actually two or more molten polymer together into a single extruded.共挤加工过程实际上是两种或更多种熔融聚合物组合成单一挤出物。

5.Typical heat seapng systems often require intensive cleaning as the product tends to melt and accumulate in the seapng zone.典型的热密封系统往往需要密集的清洁产品往往熔融，积聚在封闭区。

6.The mass flow rate of the molten metal is controlled by means of a choke element fitted in the casting trough.熔融金属的质量流率借助配合在浇注槽内的一个扼流元件控制。

7.revolves around the abipty of a thermoplastic material to be softened by heat and to Harden when cooled.注射成型的基本概念是使热塑性材料在受热时熔融，冷却时硬化。

8.The molten salt is able to retain a very large amount of heat -- enough to drive the plant for 15 hours without sunpght.熔融盐可以保留大量的热量——足够让发电站在没有阳光的情况下运行15小时。

9.Extraction procedure of China and United States were used to determine characteristic of fly ash and its melting residues.采用了中国和美国的危险废物浸出毒性鉴别方法来判别飞灰及其熔融渣的浸出毒性。

10.Since there is no coloring section and part of no reflection, so nothing natural, just as the glass melting and coloring.由于没有着色的部分与着色部分没有反射差，所以完全没有不自然感，就如同将玻璃熔融着色一样。